Home
ECP Series Panels
ECP Series Panels
Custom Controls
The Tulsar Controls ECP Series Panel is the affordable water solution for your industrial or commercial business. Ideal for condominium complexes or golf courses with excess wastewater to manage. The TECP Series Panel is the innovative and efficient way to manage the wastewater in your large building or facility. Ideally suited for a heavy industrial, municipal, commercial or multi-residential settings.
-
Standard Features
Standard features include:
- NEMA 1 enclosure
- Main disconnect
- Coordinated Motor Starters are resettable from the outer door
- 120V control circuit or transformer
- IEC rated motor contactors
- Overload protection
- Float control logic
- Pump terminal blocks
- Float switch terminal blocks
- Dry contact terminal blocks
- Ground lugs
- Pump run lights
- High level light
- Dry contacts for remote alarm
- Hand-Off-Auto switches
- Alarm Test and Acknowledge switches
- Audible high water alarm
- Steel enclosures
- Numerous options to satisfy your individual needs
- (An alternator is included for Duplex models)
-
Optional Features
Alarms and Status
- Alarm Bell (Nema 1) (1)
- Alarm Horn (Nema 4) (2)
- Wet contacts for remote alarm (3)
- Extra dry contacts for remote alarm (4)
- Dry contacts for equipment status (5)
- 4 Channel landline Autodialer with battery backup (6)
- 8 Channel Cellular Autodialer with built in battery backup (7)
Pump Monitoring
- Pump seal leak alarm (Price is per pump) (8a-Single probe; 8b-Dual Probe; 8c- Single or Dual probe) (8)
- Pump heat sensor cut-out – auto reset (Price is per pump) (9)
- Pump heat sensor cut-out and alarm – auto reset (Price is per pump) (10)
- Pump heat sensor lockout, transfer and alarm-manual reset (price is per pump) (Transfer on duplex panels only) (11)
- Pump overload fault lockout, transfer and alarm- manual reset (price is per pump) (Transfer on duplex panels only) (12)
- Pump undercurrent fault lockout and alarm- manual reset (Price is per pump) (Transfer on duplex panels only) (13)
- Fuse blown fault lockout and alarm – manual reset (Price is per pump) (14)
- Circuit breaker tripped lockout and alarm – manual reset (Price is per pump) (15)
- EHSM (Electronic heat and seal monitor), (price is per pump) (16)
- Minicas (Price is per pump) (free issued) (16a)
- Minicas (Price is per pump) (16b)
- EHSM c/w PTC relay (Price is per pump) (17)
Power
- 15 AMP GFI receptacle for 230/460/575V 3φ panels (neutral not available) (18)
- GFI receptacle for 1φ and 120/208/3/60 panels (neutral is available) (19)
- Dexon heater/blower option (Dexon status board free issued) (20)
- 120V breaker for pit light/vent fan for 230/460/575V 3φ panels (no neutral) (21)
- 120V breaker for pit light/vent fan for 1φ and 120/208/3/60 panels (with neutral) (22)
- Control transformer c/w fusing for 1φ or 208/3/60 (23 )
- Lightning arrestor complete with fusing for 1φ (24)
- Lightning arrestor complete with fusing for 3φ (25 )
- 26 Hoffman heater/blower c/w adjustable thermostat, 200W, 120V AC (26)
- 125W Strip heater and thermostat (27)
- Voltage phase monitor with fusing (28)
- Two power sources with power transfer circuitry for control (29)
- Power failure alarm and dry contacts (30)
Level and Pressure Control
- Intrinsically safe circuitry for 1 float (31)
- Intrinsically safe circuitry for 2 floats (32)
- Intrinsically safe circuitry for 3 floats (33)
- Intrinsically safe circuitry for 4 floats (34)
- Intrinsically safe circuitry for 5 floats (35)
- Single float backup system c/w 3 timers (36)
- Two float backup (36a)
- Pressure switches operation (pressure switches are in customer’s scope) (37)
- Allen Bradley 836-C7A pressure switch (38)
- EBS1 pressure controller with in line 0-10VDC pressure transducer with 5 M cable (39)
- EBS2 pressure controller with in line 4-20mA pressure transducer with 5 M cable and analog card (40)
- ELM level controller with submersible pressure transducer with 10M cable and analog card (41)
- ELM level controller and analog card- Pressure transducer free issued (41a)
- Intrinsically safe barrier for ELM (42)
- Dosing circuitry using dosing timer (43)
- EDM dosing controller (44)
- Low level alarm, auto reset pump and auto reset alarm (45)
- Low level alarm, auto reset pump and manual reset alarm (46)
- Non concurrent start timer (47)
- Three float circuitry, manual reset alarm (48)
- Four float circuitry, manual reset alarm (49)
- Special float sequence (stop, start, high level, override) (50)
Panels
- Elapsed time meter (non-resettable), price is per pump (51)
- Cycle counter (non-resettable), price is per pump (52)
- 22mm operator and pilot lights (Price is per pilot light) (53)
- P1 – Automatic alternation – P2 circuitry using toggle switch (54)
- P1 – Automatic alternation – P2 circuitry using 22mm selector switch (55)
- Stainless Steel Enclosure 4x (56)
- Fiberglass Enclosure 4x (57)
- Painted Steel Enclosure 4x (58)
- Capacitors and Relays (price is per pump) -free issued (C)
Standard features include:
- NEMA 1 enclosure
- Main disconnect
- Coordinated Motor Starters are resettable from the outer door
- 120V control circuit or transformer
- IEC rated motor contactors
- Overload protection
- Float control logic
- Pump terminal blocks
- Float switch terminal blocks
- Dry contact terminal blocks
- Ground lugs
- Pump run lights
- High level light
- Dry contacts for remote alarm
- Hand-Off-Auto switches
- Alarm Test and Acknowledge switches
- Audible high water alarm
- Steel enclosures
- Numerous options to satisfy your individual needs
- (An alternator is included for Duplex models)
Alarms and Status
- Alarm Bell (Nema 1) (1)
- Alarm Horn (Nema 4) (2)
- Wet contacts for remote alarm (3)
- Extra dry contacts for remote alarm (4)
- Dry contacts for equipment status (5)
- 4 Channel landline Autodialer with battery backup (6)
- 8 Channel Cellular Autodialer with built in battery backup (7)
Pump Monitoring
- Pump seal leak alarm (Price is per pump) (8a-Single probe; 8b-Dual Probe; 8c- Single or Dual probe) (8)
- Pump heat sensor cut-out – auto reset (Price is per pump) (9)
- Pump heat sensor cut-out and alarm – auto reset (Price is per pump) (10)
- Pump heat sensor lockout, transfer and alarm-manual reset (price is per pump) (Transfer on duplex panels only) (11)
- Pump overload fault lockout, transfer and alarm- manual reset (price is per pump) (Transfer on duplex panels only) (12)
- Pump undercurrent fault lockout and alarm- manual reset (Price is per pump) (Transfer on duplex panels only) (13)
- Fuse blown fault lockout and alarm – manual reset (Price is per pump) (14)
- Circuit breaker tripped lockout and alarm – manual reset (Price is per pump) (15)
- EHSM (Electronic heat and seal monitor), (price is per pump) (16)
- Minicas (Price is per pump) (free issued) (16a)
- Minicas (Price is per pump) (16b)
- EHSM c/w PTC relay (Price is per pump) (17)
Power
- 15 AMP GFI receptacle for 230/460/575V 3φ panels (neutral not available) (18)
- GFI receptacle for 1φ and 120/208/3/60 panels (neutral is available) (19)
- Dexon heater/blower option (Dexon status board free issued) (20)
- 120V breaker for pit light/vent fan for 230/460/575V 3φ panels (no neutral) (21)
- 120V breaker for pit light/vent fan for 1φ and 120/208/3/60 panels (with neutral) (22)
- Control transformer c/w fusing for 1φ or 208/3/60 (23 )
- Lightning arrestor complete with fusing for 1φ (24)
- Lightning arrestor complete with fusing for 3φ (25 )
- 26 Hoffman heater/blower c/w adjustable thermostat, 200W, 120V AC (26)
- 125W Strip heater and thermostat (27)
- Voltage phase monitor with fusing (28)
- Two power sources with power transfer circuitry for control (29)
- Power failure alarm and dry contacts (30)
Level and Pressure Control
- Intrinsically safe circuitry for 1 float (31)
- Intrinsically safe circuitry for 2 floats (32)
- Intrinsically safe circuitry for 3 floats (33)
- Intrinsically safe circuitry for 4 floats (34)
- Intrinsically safe circuitry for 5 floats (35)
- Single float backup system c/w 3 timers (36)
- Two float backup (36a)
- Pressure switches operation (pressure switches are in customer’s scope) (37)
- Allen Bradley 836-C7A pressure switch (38)
- EBS1 pressure controller with in line 0-10VDC pressure transducer with 5 M cable (39)
- EBS2 pressure controller with in line 4-20mA pressure transducer with 5 M cable and analog card (40)
- ELM level controller with submersible pressure transducer with 10M cable and analog card (41)
- ELM level controller and analog card- Pressure transducer free issued (41a)
- Intrinsically safe barrier for ELM (42)
- Dosing circuitry using dosing timer (43)
- EDM dosing controller (44)
- Low level alarm, auto reset pump and auto reset alarm (45)
- Low level alarm, auto reset pump and manual reset alarm (46)
- Non concurrent start timer (47)
- Three float circuitry, manual reset alarm (48)
- Four float circuitry, manual reset alarm (49)
- Special float sequence (stop, start, high level, override) (50)
Panels
- Elapsed time meter (non-resettable), price is per pump (51)
- Cycle counter (non-resettable), price is per pump (52)
- 22mm operator and pilot lights (Price is per pilot light) (53)
- P1 – Automatic alternation – P2 circuitry using toggle switch (54)
- P1 – Automatic alternation – P2 circuitry using 22mm selector switch (55)
- Stainless Steel Enclosure 4x (56)
- Fiberglass Enclosure 4x (57)
- Painted Steel Enclosure 4x (58)
- Capacitors and Relays (price is per pump) -free issued (C)
English